高级检索

单效蒸馏海水淡化装置热力性能实验研究

An Experimental Study on Thermal Performance of a Single Effect Distillation Desalination Device

  • 摘要: 板式低温蒸馏海水淡化技术是远洋船舶的重要淡水制备方法, 文章根据板式低温蒸馏的热力学原理, 设计并制造了一台蒸馏海水淡化装置, 并以产水率为优化目的进行了相关实验研究。结果表明:热源水入口温度和流量是影响系统产水率的重要参数, 产水率随热源水入口温度(60~74℃)和流量(2 000~3 900 kg/h)的增大基本呈线性增大的趋势;进料水流量存在最优值(150 kg/h 左右), 低于最优值时, 产水率随进料水流量增大而增大, 超过最优值后, 进料水流量并不能显著提高产水率, 甚至导致产水率下降, 相关实验数据对海水淡化装置的优化设计提供了数据支持。

     

    Abstract: Plate heat exchanger (PHE) freshwater generators are wildly applied at ocean vessels for freshwater supply. In this paper, based on the thermodynamics principle of PHE, a distillation desalination device was designed and manufactured. Water production rate of the investigated PHE device was tested to obtain an optimized setting. The experimental results showed that, the heat source water temperature at inlet and flow rate are the two major factors that affect the freshwater generator performance. Basically, freshwater production rate is linearly with the increase of heat source water inlet temperature increases (60-74℃) and flow (2 000-3 900 kg/h). Feed water flow has an optimal value of about 150 kg/h, and the water production rate increases with the feed water flow below the optimal value. Feed water flow did not increase the rate of water production significantly while the feed water flow over the optimal value, and even led to the decrease of the water production rate. The obtained data can provide empirical reference for the design and optimization of PHE devices.

     

/

返回文章
返回