低噪声电容式超声传感器的结构与电路设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

本文得到了深圳市基础研究计划(JC201005270363A)、深圳市三大产业发展专项资金项目(JC201104220265A)的支持。


The Design of Low Noise Circuit and Structure for CMUT Sensor
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文提出了一种紧凑的可动浮栅型电容式超声传感器(Capacitive Micromachined Ultrasonic Transducer,CMUT)器件结构和低噪声高频电路。该结构包含通常CMUT上下电极和MOS晶体管。建模对浮栅型CMUT器件进行了直流分析和时变电容的瞬态分析,模拟结果表明该传感器结构比传统CMUT具有更低的寄生电容和输出阻抗。在1.5Pa超声声压下进行Cadence和ANSYS仿真,输出信号为40.1 mV,在1 MHz等效输出噪声为16.59 nV/Hz1/2,直流增益为74.73dB,单位增益带宽为488 MHz。指标优于传统的CMUT结构,具有医学三维成像的应用前景。

    Abstract:

    A compact CMUT structure with movable floating gate and low noise broad bandwidth circuit is presented in this paper. The new active CMUT structure comprises two traditional CMUT electrodes and MOS transistor beneath it. Its spice model on DC analysis and transient analysis with time-varying capacitor is investigated. It exhibits low overall parasitic capacitance and low output impedance compared with traditional one. According to Cadence simulation results under 1.5Pa ultrasound pressure, the output signal amplitude is 40.1 mV, while the noise floor is 16.59 nV/Hz1/2 at 1MHz operation frequency of CMUT receiver, unit gain frequency is 488 MHz and DC gain is 74.73 dB. These results show that the proposed CMUT structure is superior to existing one and has advantages to make an interesting potential application on CMUT array imaging.

    参考文献
    相似文献
    引证文献
引用本文

引文格式
彭本贤,俞 挺,于峰崎.低噪声电容式超声传感器的结构与电路设计 [J].集成技术,2012,1(3):15-19

Citing format
PENG Ben-xian, YU Ting, YU Feng-qi. The Design of Low Noise Circuit and Structure for CMUT Sensor[J]. Journal of Integration Technology,2012,1(3):15-19

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2013-01-04
  • 出版日期:
文章二维码