一种新型显微 CT 系统设计
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

广东省创新研究团队项目(2011S013);国家重点研发计划(2016YFC0105102);深圳市技术攻关项目(JSGG20160229203812944)

伦理声明:



A Novel Design of Micro-CT System
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    传统的 CT 设备由于受到系统架构的物理限制,导致最终扫描结果中运动伪影影响很大,文章依据碳纳米管的场致发射原理设计出一套工作在准静态模式下的显微 CT。该系统采用 35 个碳纳米管 X射线光源和 5 个探测器,相对于传统 CT,通过外部时序控制减少了机架的机械旋转次数和行程,大大降低了运动伪影的影响。由于重建角度是稀疏的,因此通过采用迭代重建算法模拟仿真验证了该系统的有效性。

    Abstract:

    Limited to the system architecture in conventional CT, artifacts induced by respiratory motion during routine diagnosis severely degrades the image quality. A novel micro-CT system performing well in a quasi-static way is proposed according to the principle of field emission. It employs 35 carbon nanotubes based X-ray tubes and 5 flat detectors, motion artifacts can be greatly suppressed by reducing the gantry rotation times and range under control of external sequential when compared with conventional CT system. To validate the feasibility of the proposed system, iterative reconstruction algorithm is adopted on simulation due to sparse sampling.

    参考文献
    相似文献
    引证文献
引用本文

引文格式
张志诚,梁晓坤,朱轩玉,等.一种新型显微 CT 系统设计 [J].集成技术,2017,6(2):66-72

Citing format
ZHANG Zhicheng, LIANG Xiaokun, ZHU Xuanyu, et al. A Novel Design of Micro-CT System[J]. Journal of Integration Technology,2017,6(2):66-72

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-03-24
  • 出版日期: