基于多孔基片聚合物注入方法的薄膜固体氧化物燃料电池无支撑薄膜制备研究
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

深圳市无人驾驶感知决策与执行技术工程实验室(Y7D0 0 4 ) ; 韩国未来创造科学部国家研究基金创新材料发现计划 (2017M3D1A1040688);韩国未来创造科学部国家研究基金全球前沿研发计划(2012M3A6A7054855)

伦理声明:



Fabrication of Free-Standing Thin Film by Injecting Polymer into Macroporous Substrate for Thin Film Solid Oxide Fuel Cells
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为了控制薄膜固体氧化物燃料电池阳极的小孔尺寸,该研究提出了一种工艺简便的聚合物注入方法。首先,将液体聚苯乙烯以一定的压力注入到多孔氧化镍-氧化钇稳定的氧化锆(NiO-YSZ)基片;然后,经过机械切割,利用溅射法在阳极基片上沉积 300 nm 厚的电极薄膜;最后,利用热解法将 基片孔隙的聚苯乙烯移除,完成多孔阳极基片上的电极薄膜制备。利用该法获取的 NiO-YSZ 基片具有更好的小孔尺寸可控性,同时可以实现无支撑薄膜的制备,从而显著提高大面积薄膜固体氧化物燃料电池的生产效率。

    Abstract:

    To control the pore size of anode in thin film solid oxide fuel cells, a simple polymer injection method was introduced to replace conventional anode functional layer method in this paper. Firstly, the liquid polystyrene was pressed and injected to the porous nickel oxide yttria-stabilized zirconia (NiO-YSZ) substrate. Then, a 300-nm-thick film was deposited on a composite substrate by sputtering procedure. Finally,by removing polystyrene from the pore of substrate through pyrolysis, a free-standing thin film on the porous substrate could be obtained. The polymer-injected NiO-YSZ substrate has more controlled pores. Moreover,with the proposed method, throughput of large scale thin film solid oxide fuel cell can be improved.

    参考文献
    相似文献
    引证文献
引用本文

引文格式
苏芝玄,金有圣,郑春花,等.基于多孔基片聚合物注入方法的薄膜固体氧化物燃料电池无支撑薄膜制备研究 [J].集成技术,2018,7(6):2-8

Citing format
SO Jihyun, KIM Yusung, ZHENG Chunhua, et al. Fabrication of Free-Standing Thin Film by Injecting Polymer into Macroporous Substrate for Thin Film Solid Oxide Fuel Cells[J]. Journal of Integration Technology,2018,7(6):2-8

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-11-20
  • 出版日期: